- Using for difficult molding product. It
is not necessary to change the mold. Vacuumfirst, then molding.
It could reduce the failure rate of finish product, save
time and get high efficiency.
- The vacuum degree can be reach to 650°700mmHG
within 4 seconds in the vacuum room.
|
- Three or four layers mold
eject opening: suit for product of seal, rubber with metal,
using the plate mold type to replace the general lathe mold
seal forming machine.
- Front eject mold opening: suit for packing,
keyboards, O-ring, medical rubber parts, livelihood rubber
parts, ordinary rubber parts, automobile rubber parts and
so on.
- Rail Mold Opening: For keyboards, O-ring
and so on.
|
- Special design is available to satisfy customer's requirement.
- We will not notify to our customer when the specification
changed. Please refer to our website: http://www.hsin-chi.com
- Longer stroke: 400 or 500 mm is available.
- Bigger platform: within 50mm selected.
- Mold opening type: There are seven types of mold opening,
front eject mold opening, rail mold opening, in/out mold
opening, arm mold opening, three layers mold opening, four
layers mold opening, middle pull mold function, and punching
function. It could select by customer.
|
